|
|
SINUMERIK INPUT/OUTPUT
 Modules from the SINUMERIK product range are used as machine I/Os.
EFP single I/O module
The single I/O module EFP has 64 inputs and 32 short-circuit-proof outputs. The total current for the outputs is 12 A, i.e. 32 outputs with 0.5 A each and a simultaneity factor of 0.75.
Up to 3 single I/O modules can be connected to the SINUMERIK 810D powerline or SINUMERIK 840D power line, combinations with SIMATIC S7-300 strings are permissible.
Terminal strip converter
A terminal strip converter is used for safe and easy signal connection between the input/output groups of the control and the machine. If you are using terminal strip converters with LED display, the LED is lit when the signal mode is active/high. This simplifies simulation, setup and service at the interface between the control and the machine.
The terminal strip converter is mounted easily by snapping it onto DIN rails.
NCU terminal with DMP compact modules.
SINUMERIK INPUT/OUTPUT SERIES (The other see in SIMATIC S7-300)
| SINUMERIK I/O |
| EFP single I/O module |
| 6FC5411-0AA00-0AA0 |
SINUMERIK 810D/840D SINGLE I/O MODULE 64 DI/32 DO ISOLATED, 32 DO WITH 0.5A, SHORT-CIRCUIT PROOF, TOTAL CURRENT FOR THE OUTPUTS = 12 A W. SIMULTANEITY FACTOR 0.75 |
| 6FC5411-0AA80-0AA0 |
SINUMERIK 810D CONNECTING CABLE, SHIELDED, FOR SINGLE-TIER VERSION FOR A GROUP OF MODULES FOR 1 I/O STATION |
|
| NCU terminal with DMP compact modules |
| 6FC5111-0CA01-0AA0 |
SINUMERIK 840C/840CE/840D/840DE ELECTRICAL MODULE FOR CNC DMP COMPACT, 16 INPUTS 24 V, FLOATING |
| 6FC5111-0CA02-0AA2 |
SINUMERIK 840C/840CE/840D/840DE ELECTRICAL MODULE FOR CNC DMP-COMPACT 16A 16 OUTPUTS 24 V DC/0.5 A FLOATING, SHORT-CIRCUIT-PROOF, W. INTEGR. FREE-WHEELING DIODE |
| 6FC5111-0CA03-0AA2 |
SINUMERIK 840C/840CE/840D/840DE ELECTRICAL MODULE FOR CNC DMP-COMPACT 8A 8 OUTPUTS 24 V DC/2 A FLOATING, SHORT-CIRCUIT PROOF, W. INTEGR. FREE-WHEELING DIODE |
| 6FC5111-0CA04-0AA0 |
SINUMERIK 840C/840CE/840D/840DE ELECTRICAL MODULE FOR CNC DMP COMPACT, 1 ANALOG INPUT |
| 6FC5111-0CA05-0AA0 |
SINUMERIK 840C/ 840CE ELECTRICAL MODULE FOR CNC DMP COMPACT 1 OUTPUT ANALOG |
| 6FC5211-0AA00-0AA0 |
SINUMERIK 810D/DE/840D/DE ELECTRICAL MODULE FOR CNC NCU TERMINAL BLOCK FOR 8 DMP COMPACT MODULES, FOR RAPID ANALOG AND DIGITAL NC INPUTS AND OUTPUTS |
| 6FC5211-0AA10-0AA0 |
SINUMERIK 810D/DE/840D/DE ELECTRICAL MODULE FOR CNC DMP COMPACT MODULE, 1 ANALOG INPUT, 75 MICROSEC CONVERSION TIME, FOR NCU TERMINAL BLOCK |
|
| SINUMERIK Analog Drive Interface for 4 axes ADI 4 |
| 6FC5211-0BA01-0AA4 |
SINUMERIK PERIPHERIE ANALOG DRIVE INTERFACE (ADI4) FOR 4 AXES OVER PROFIBUS DP WITH MOTION CONTROL FUNCTIONALITY FIRMWARE 01.04.07 |
|
| SINUMERIK PP 72/48 I/O module |
| 6FC5611-0CA01-0AA1 |
SINUMERIK I/O MODULE PP 72/48 72 INPUTS 24 V 48 OUTPUTS 24 V, 0.25 A COATING VERSION PP72/48 |
SEE OTHER
SINUMERIK 802S Base line
SINUMERIK 802C Base line
SINUMERIK 802D sl
SINUMERIK 810D
SINUMERIK 840Di sl
SINUMERIK 840D
SINUMERIK 840D sl
SINUMERIK OPERATOR
SINUMERIK I/O
|
IF YOU WANT TO FIND A REPLACEMENT PART USING "SEARCH" ON BELOW LEFT SIDE AND KEY IN YOUR PART No. WITHOUT ANY SPACE AND "-". THE RESULT WILL RECOMMEND REPLACEMENT FOR AN OBSOLETE PART. EXAMPLE : SEARCH PART No. "6ES7 316-1AG00-0AB0" USING KEY WORD "6ES73161AG000AB0" SEE DETAIL REPLACEMENT PART "6ES7316-2AG00-0AB0" IN DESCRIPTION.
6es51353ka11,
6es51353ka32,
6es51353ua41,
6es51353ua42,
6es51833ua12,
6es51833ua13,
6es51833ua22,
6es51883ua11,
6es51883ua12,
6es51883ua22,
6es51883ua32,
6es51883ua42,
6es53553ua11,
6es53742fp21,
6es53742kk21,
6es53742kl21,
6es53742km21,
6es53760aa11,
6es53760aa21,
6es53760aa31,
6es53761aa11,
6es53761aa14,
6es53761aa21,
6es53761aa31,
6es53770aa11,
6es53770aa21,
6es53770aa32,
6es53770aa41,
6es53770ab21,
6es53770ab31,
6es53770ab41,
6es53770ba31,
6es59213ua12,
6es59463ua21,
6es59463ua22,
6gk11430aa00,
6gk11430aa01,
6gk11430ab01,
6gk11430ta00,
6gk11430ta01,
6gk11430ta02,
6gk11430tb00,
SIEMENS ®, SIMATIC ®, SIMOVERT®, and SINUMERIK ® are registered trademarks of Siemens AG.
All trademarks property of their respective companies. Errors excepted.
|
|
